[Free] 2018(Jan) EnsurePass Examcollection Oracle 1z0-102 Dumps with VCE and PDF 51-60

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Oracle Official New Released 1z0-102
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/1z0-102.html

Oracle Weblogic Server 11g: System Administration I

Question No: 51

The computer that the Administration Server was running on has crashed and cannot be restarted. Which three steps are required to bring up the Administration Server on the backup computer?

  1. Move the crashed computer#39;s IP address to the backup computer.

  2. Have WebLoqic Server installed on the backup computer.

  3. Have a copy of the configuration and security files of the domain on the backup computer.

  4. Shut down the managed servers of the domain.

  5. Start the Administration Server on the backup computer.

Answer: B,C,E

Explanation: If a machine crash prevents you from restarting the Administration Server on the same machine, you can recover management of the running Managed Servers as follows:

  • 1. Install the WebLogic Server software on the new administration machine (if this has not already been done).

    2. Make your application files available to the new Administration Server by copying them from backups or by using a shared disk. Your application files should be available in the same relative location on the new file system as on the file system of the original Administration Server.

  • 3. Make your configuration and security data available to the new administration machine by copying them from backups or by using a shared disk. For more information, refer to Directory and File Backups for Failure Recovery.

  • (E) 4. Restart the Administration Server on the new machine.

    Reference: Avoiding and Recovering From Server Failure, Restarting an Administration

    Server on Another Machine

    Question No: 52

    You received a signed certificate from a Certificate Authority and you wish to use the keytool command-line utility to store it in your keystore. Which command of keytool would you us

    1. -genkey pair

    2. -import cert

    3. -gensockey

    4. -importkeystore

    5. – storepasswd

    Answer: B

    Explanation: B: keytool – import

    Reads the certificate or certificate chain (where the latter is supplied in a PKCS#7 formatted reply) from the file cert_file, and stores it in the keystore entry identified by alias. If no file is given, the certificate or PKCS#7 reply is read from stdin. keytool can import

    X.509 v1, v2, and v3 certificates, and PKCS#7 formatted certificate chains consisting of certificates of that type.

    Reference: Configuring Identity and Trust, Commonly Used keytool Commands http://docs.oracle.com/cd/E11035_01/wls100/secmanage/identity_trust.html

    Question No: 53

    YCMJ are viewing the deployments in the administration console. A web application that is targeted to the Managed Server named server01 has a State of quot;Now.quot;

    Which statement best explains this State?

    1. Server01 is running and the application has been installed.

    2. Sarver01 is shut down and the application has been installed.

    3. Server01 is running and the application has not been installed.

    4. Server01 is shut down and the application has not been installed.

    5. Server01 is running and the application was installed for the first time.

    6. Server01 is running and the application has been installed, but is not servicing requests.

    Answer: B

    Question No: 54

    Which three tasks are required to use JDBC session persistence for a web application?

    1. Enable automatic migration on each server.

    2. Create the session database table.

    3. Configure SSL on each server.

    4. Edit the weblogic.xml descriptor.

    5. Create a multi data source.

    6. Create a JDBC data source.

      Answer: B,D,F

      Explanation: To specify JDBC-based persistent session storage for a Web application, follow these steps:

      1. (B) Create a table named wl_servlet_sessions in the database

      2. Assign a connection pool that has read/write permissions to the wl_servlet_sessions database table to your WebLogic cluster.

      3. Assign the connection pool#39;s associated data source to the same cluster.

      4. (D) Edit the associated weblogic.xml file using an XML editor and set the value of thePersistentStoreType and PersistentStorePool parameters

        Incorrect answer:

        E: A multi data source is an abstraction around a group of data sources that provides load balancing or failover processing between the data sources associated with the multi data source.

        Reference: Implementing Highly Available and Scalable Solutions Using the WebLogic Cluster, JDBC-Based Persistent Storage

        http://www.informit.com/articles/article.aspx?p=101737amp;seqNum=7

        Question No: 55

        Which three statements are true about the default behavior of WebLogic Server proxy plug- ins?

        1. The proxy will pin a client to a specific server if a session cookie is created.

        2. The proxy fails over to another server if a connection or request times out.

        3. The proxy distributes requests to cluster members based on their CPU usage.

        4. The proxy dynamically learns the latest locations of cluster members.

        5. The proxy always uses SSL, regardless of the client#39;s protocol.

        6. The proxy replicates session data to its backup proxy.

    Answer: A,B,D

    Explanation: A: When the HTTP client requests the servlet, HttpClusterServlet proxies the request to the WebLogic Server cluster. HttpClusterServlet maintains the list of all servers in the cluster, and the load balancing logic to use when accessing the cluster. In the above example, HttpClusterServlet routes the client request to the servlet hosted on WebLogic Server A. WebLogic Server A becomes the primary server hosting the client#39;s servlet session.

    To provide failover services for the servlet, the primary server replicates the client#39;s servlet session state to a secondary WebLogic Server in the cluster. This ensures that a replica of the session state exists even if the primary server fails (for example, due to a network failure). In the example above, Server B is selected as the secondary.

    The servlet page is returned to the client through the HttpClusterServlet, and the client browser is instructed to write a cookie that lists the primary and secondary locations of the servlet session state. If the client browser does not support cookies, WebLogic Server can use URL rewriting instead.

    Figure, Accessing Servlets and JSPs using a Proxy:

    Ensurepass 2018 PDF and VCE

    B: In clusters that utilize Web servers with WebLogic proxy plug-ins, the proxy plug-in handles failover transparently to the client. If a server fails, the plug-in locates the replicated HTTP session state on a secondary server and redirects the client#39;s request accordingly.

    D: The WebLogic proxy plug-in maintains a list of WebLogic Server instances that host a clustered servlet or JSP, and forwards HTTP requests to those instances on a round-robin basis.

    Reference: Using WebLogic Server Clusters, Failover and Replication in a Cluster

    Reference: Using WebLogic Server Clusters, Load Balancing in a Cluster

    Question No: 56

    Refer to the Exhibit

    Ensurepass 2018 PDF and VCE

    What is the meaning of the yellow triangle icon next to Listen Address?

    1. This attribute has no value.

    2. The server must be running to change this attribute.

    3. The server must be shut down to change this attribute.

    4. The server must be restarted for a change to this attribute to take effect.

    5. This attribute is read only and cannot be changed in the administration console

    Answer: D

    Explanation: The server instance for which you configure the listen address does not need to be running. If it is running, you must restart it after you complete these steps.

    Reference: Administration Console Online Help, Configuring the Listen Address from the Administration Console

    Question No: 57

    You run the following WLST script and it completes successfully. Which statement best describes what the script created?

    Ensurepass 2018 PDF and VCE

    1. A CMO named myserver with the listen address 192.168.1.102 and port 8008

    2. A Managed Server named myserver with the listen address 192.168.1.102 and port 7001

    3. A Managed Server named myserver with listen address 192.168.1.102 and port 8008

    4. An Administration Server named myserver with the listen address 092.168.1.102 and port 8008

    Answer: C

    Explanation: A managed server (not a CMO, not an administration server) is created. Port is 8008.

    Note: Listing: Creating a Managed Server connect(quot;usernamequot;,quot;passwordquot;)

    edit() startEdit()

    svr = cmo.createServer(quot;managedServerquot;) svr.setListenPort(8001) svr.setListenAddress(quot;my-addressquot;) save()

    Reference: WebLogic Scripting Tool, Using WLST Online to Update an Existing Domain

    Question No: 58

    You are logged in to the administration console for a domain that is running in Development Mode. The domain configuration, you select Production Mode, Save, and then Activate Changes. Which two statements are true?

    1. All running servers must be restarted.

    2. Only the Administration Server must be restarted.

    3. Auto-deployment will no longer be available for this domain.

    4. This change may be made only through the Administration Server#39;s secure port.

    5. If you decide to go back to Development Mode, uncheck Production Mode in the administrate console.

      Answer: A,C

      Explanation: All servers in a domain run either in development mode or production mode. To configure all servers in a domain to run in production mode:

      1. If you have not already done so, in the Change Center of the Administration Console, click Lock amp; Edit .

        In the left pane of the Console, under Domain Structure, select the domain name.

      2. Select Configuration gt; General and select the Production Mode check box.

      3. Click Save, and then, to activate these changes, in the Change Center, click Activate Changes.

      4. Shut down any servers that are currently running.

      5. Invoke the domain#39;s startWebLogic script.

        The Administration Server starts in the new mode.

      6. If the domain contains Managed Servers, start the Managed Servers. Result

        As each Managed Server starts, it refers to the mode of the Administration Server to determine its runtime mode.

        Note: Once you have changed to production mode, whether by using a start command argument, the Console, or WLST, you cannot change back to development mode without restarting the server.

        By default auto deployment is turned off in Production Mode (however it can be later turned on).

        Reference: Administration Console Online Help, Change to production mode

        Question No: 59

        Identify three ways to create a domain template.

        1. Administration console

        2. Domain Template Builder

        3. unpack command

        4. pack command

        5. Node Manager

        6. WLST

        7. Configuration Wizard

    Answer: B,D,F

    Explanation: There are three ways to create domain templates:

    • Domain Template Builder (config_builder.sh under WL_HOME/common/bin)

      Go to Start Menu-gt;All programs-gt;weblogic10gR3-gt;Tools-gt;Domain Template Builder

    • pack command

      The pack command creates a template archive (.jar) file that contains a snapshot of either an entire domain or a subset of a domain. You can use a template that contains a subset of a domain to create a Managed Server domain directory hierarchy on a remote machine.

    • WLST offline command line tool

    Reference: Creating Domain Templates Using the Domain Template Builder Reference: Creating Domains Using WLST Offline

    Question No: 60

    View the following file excerpt, which configures HTTP session replication:

    lt;session – descriptor gt;

    lt;persistent-store-typegt;replicatedlt;/persistent-store-typegt;

    lt;/session-descriptorgt;

    From which file is this excerpt taken?

    1. weblogic-application.xml

    2. weblogic.xml

    3. session.xml

    4. config.xml

    5. web.xml

    Answer: B

    Explanation: To configure file-based persistent storage for sessions:

    In the deployment descriptor file weblogic.xml, set the persistent-store-type parameter in the session-descriptor element in the weblogic.xml deployment descriptor file to file. See session-descriptor.

    Set the directory where WebLogic Server stores the sessions.

    Reference: Oracle Fusion Middleware Oracle WebLogic Server Administration Console Online Help 11g Release 1, Using File-based Persistent storage

    http://docs.oracle.com/cd/E15523_01/web.1111/e13712/sessions.htm ()

    100% Ensurepass Free Download!
    Download Free Demo:1z0-102 Demo PDF
    100% Ensurepass Free Guaranteed!
    1z0-102 Dumps

    EnsurePass ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.