[Free] 2018(Jan) EnsurePass Testking Oracle 1z0-878 Dumps with VCE and PDF 181-190

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Oracle Official New Released 1z0-878
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/1z0-878.html

Oracle Solaris 10 System Administrator Certified Professional Exam, Part II

Question No: 181 – (Topic 2)

When you try to NFS mount a directory from the NFS server pepper to the NFS client paprika, the following error occurs:

# mount -F nfs pepper:/export/home /data NFS server pepper not responding, still trying

Which troubleshooting step is used to correct this error?

  1. on the NFS server pepper, run the command: # dfmounts

  2. on the NFS client paprika, ping the NFS server: # ping pepper

  3. on the NFS client paprika, run the command: # dfshares paprika

  4. on the NFS client paprika, run the command: # ps -ef |grep nfsd

  5. on the NFS client paprika, run the command: # ps -ef |grep mountd

Answer: B

Question No: 182 – (Topic 2)

You try to mount an NFS file system, /datadir, on host fusion from the remote NFS server gravity using the NFSv4 protocol. The following message appears:

# mount -F nfs gravity:/datadir /datadir

nfs mount: gravity:/datadir: No such file or directory What can cause the error?

  1. The directory is spelled incorrectly in /etc/vfstab.

  2. The directory /datadir does NOT exist on the NFS client fusion.

  3. The NFS share /datadir does NOT exist on NFS server gravity.

  4. The host fusion is NOT allowed to access /datadir on NFS server gravity.

  5. The permissions on the directory /datadir on NFS server gravity are too restrictive.

Answer: C

Question No: 183 – (Topic 2)

During boot up, your x86-based laptop that is running the Solaris 10 OS displays the message:

NFS server arizona not responding, still trying

Which two are valid troubleshooting procedures for this problem? (Choose two.)

  1. restart the NFS client-side daemons

  2. verify that the nfsd daemon is running on your laptop

  3. verify that your laptop is connected to the correct network

  4. verify that the server arizona is up and that its network interface is up.

  5. verify that the NFS client entry in /etc/inetd.conf is correct, then get inetd to reread the

/etc/inetd.conf

Answer: C,D

Question No: 184 – (Topic 2)

What are four types of AutoFS maps? (Choose four.)

  1. Slave

  2. Direct

  3. Binary

  4. Master

  5. Indirect

  6. Sparse

  7. Special

  8. Cannonical

Answer: B,D,E,G

Question No: 185 – (Topic 2)

You are creating a new direct map to allow a new application that has been installed on an application server to become available. Which two commands activate the new map?

(Choose two.)

  1. /usr/sbin/mountall

  2. /usr/sbin/automount

  3. /usr/bin/pkill -HUP inetd

  4. /usr/sadm/bin/smreg add -d /etc/auto_master

  5. /usr/sbin/svcadm restart svc:/system/fileystem/autofs

Answer: B,E

Question No: 186 – (Topic 2)

A system is configured to use automounted home directories and has the following

/etc/auto_master file:

# Master map for automounter

#

/net -hosts -nosuid,nobrowse

/home auto_home -nobrowse

The system also has the following /etc/auto_home file:

# Home directory map for automounter

#

larry stooge1:/export/home/larry curly stooge2:/export/home/curly moe stooge3:/export/home/moe

How should the home directory for curly be specified in the password database?

  1. /curly

  2. /home/curly

  3. /net/stooge2/curly

  4. /export/home/curly

  5. /net/stooge2/export/home/curly

Answer: B

Question No: 187 – (Topic 2)

A system called renegade is configured to access a CAD application and the man pages using

automount. The system has the following /etc/auto_master file:

# Master map for automounter

#

/home auto_home -nobrowse

/- auto_direct -ro

The renegade system also has the following /etc/auto_direct file: # Superuser-created direct map for automounter

#

/tools/cad -ro,soft cadserver:/export/cad,v2

/usr/share/man -ro,soft docserver1,docserver2:/usr/share/man

Which two statements are true about the renegade system? (Choose two.)

  1. To access the CAD application, the user can type # cd /tools/cad.

  2. Before trying to access the man pages, the user must first run the # automount command.

  3. If the mount of /tools/cad fails for any reason, the system continues to retry until cadserver responds.

  4. The /usr/share/man directory is mounted from docserver1 or docserver2, depending upon availability.

  5. To access the CAD application, the user must type the full path as follows: # cd

/net/cadserver/export/cad,v2.

Answer: A,D

Question No: 188 – (Topic 2)

Given:

# df -lh

Filesystem size used avail capacity Mounted on

/dev/dsk/c1t0d0s0 31G 3.4G 28G 11% /

/devices 0K 0K 0K 0% /devices proc 0K 0K 0K 0% /proc

mnttab 0K 0K 0K 0% /etc/mnttab fd 0K 0K 0K 0% /dev/fd

swap 4.0G 112K 4.0G 1% /var/run

swap 4.0G 18M 4.0G 1% /tmp

/dev/dsk/c3t1d0s6 115G 8.1G 106G 8% /export

/dev/md/clones/dsk/d10

4.9G 537M 4.3G 11% /export/clones/on81-test

/dev/md/clones/dsk/d20

4.9G 656M 4.2G 14% /export/clones/on10-test

/dev/md/clones/dsk/d30

4.9G 220M 4.7G 5% /export/clones/on10-stc2

Which command helps determine the configuration of the Solaris Volume Manager logical volumes?

  1. metadb -i

  2. metadb -a

  3. metainit -p

  4. metastat -a

Answer: D

Question No: 189 – (Topic 2)

Which three statements are true about soft partitions? (Choose three.)

  1. An unlimited number of soft partitions can be created from a volume.

  2. A soft partition can be grown to use any available space on a volume.

  3. Soft partitions can be extended without moving or destroying data on other soft partitions.

  4. A soft partition can be included in a volume and directly accessed simultaneously by an application.

  5. Soft partitions are an alternative to Solaris Volume Manager software volumes for organizing disk storage.

  6. Soft partitions provide a mechanism for dividing large storage spaces into smaller, more manageable sizes.

Answer: B,C,F

Question No: 190 – (Topic 2)

You have Solaris Volume Manager software installed on your system and want to create your first metadevice. What should you do first?

  1. run a command to create the first state database

  2. run a command to initialize the configuration metadevice

  3. run the vxinstall utility to initialize the volume manager software for use

  4. create a soft partition using the -s initialize option with the appropriate command

  5. run a utility to add a license to enable Solaris Volume Manager software for Solaris 10 OS

Answer: B

100% Ensurepass Free Download!
Download Free Demo:1z0-878 Demo PDF
100% Ensurepass Free Guaranteed!
1z0-878 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.