Oracle Solaris 10 Network Administrator Certified Expert Exam
Question No: 81 DRAG DROP – (Topic 1)
Click the Task button.
Place the options in the correct order to complete the structure of the Ethernet frame.
Question No: 82 DRAG DROP – (Topic 1)
Click the Task button.
Place each TCP/IP protocol or standard on its corresponding layer of the model.
Question No: 83 – (Topic 1)
host name IP address myhost 184.108.40.206
The system myhost needs to send data to printsvr. The routing table on myhost has no entry for printsvr. The routing table on myhost has no entry for the 220.127.116.11 network.
Which entry does the routing algorithm look for next?
Question No: 84 – (Topic 1)
A new system administrator tries to determine the IPv6 IPMP configuration and sees the following:
# grep failover /etc/hostname6*
/etc/hostname6.hme0: -failover group mgrp6
/etc/hostname6.qfe0: -failover group mgrp6-1
/etc/hostname6.qfe1: -failover group mgrp6-1 Which statement is true?
There has definitely been an error configuring hme0.
The hme0 is a spare interface for the mgrp6-1 failover group.
The system is configured so that notifications are generated when hme0 fails.
Interface hme0 has priority over qfe0/qfe1 when doing a failover.
Question No: 85 – (Topic 1)
Given the following DHCP debug output:
3cdbd723: Datagram received on network device: hme0 3cdbd723: Reserved offer: 18.104.22.168
3cdbd724: Unicasting datagram to 22.214.171.124 address. 3cdbd724: Adding ARP entry: 126.96.36.199 == 080020CBCBCB
3cdbd724: Updated offer: 188.8.131.52
3cdbd725: Datagram received on network device: hme0
3cdbd725: Client: 01080020CBCBCB maps to IP: 184.108.40.206 3cdbd725: Unicasting datagram to 220.127.116.11 address.
3cdbd725: Adding ARP entry: 18.104.22.168 == 080020CBCBCB
Which two statements are true? (Choose two.)
The original client request was a DHCPREQUEST.
The IP address assignment was successfully completed.
The server received the client#39;s request, but was NOT able to send an answer to the client, and therefore repeated its answer unicast.
The original client request was a DHCPDISCOVER.
The IP address was permanently reserved for another client.
Question No: 86 – (Topic 1)
Click the Exhibit button.
A portion of the network you are managing is composed of a firewall system (fw-01) running the Solaris IP Filter firewall. The fw-01 firewall has a rule set to log and NAT the web-int system with IP 192.168.1.10/32 as web-ext with IP 22.214.171.124/32.
Because the fw-01 firewall is logging its activity, which Solaris IP Filter user-level utility must you run to print only NAT log records?
ipnat -l N
ipmon -o N
ipf -l N
Question No: 87 – (Topic 1)
A DHCP client is unable to obtain an IP address using DHCP, although other clients on the same network are able to. Which two commands can be used to assist with the diagnosis of this problem? (Choose two.)
ifconfig hme0 dhcp start verbose on the DHCP client
dhcpagent -f -d 2 on the DHCP client
snoop -v dhcp on the DHCP server
svcadm -d restart svc:/network/dhcp-server on the DHCP server
snoop -V port bootps on the DHCP server
Question No: 88 – (Topic 1)
Click the Exhibit button.
You have taken over management of a Solaris system with the Solaris IP Filter configuration shown in the exhibit. You want to improve the performance of this system.
Which two changes could you make to optimize the Solaris IP Filter configuration without changing its functionality? (Choose two.)
modify all pass in entries to be pass in quick
remove line 2
modify line 1 to be quot;block in quick allquot;
remove line 3
remove line 4
remove line 5
Question No: 89 – (Topic 1)
The default configuration of the Solaris 10 OS has packet filtering disabled on all network interfaces. To enable packet filtering on the hme0 interface of a running system, the related hme line in the /etc/ipf/pfil.ap file must be uncommented:
# IP Filter pfil autopush setup
# See autopush(1M) manpage for more information.
# Format of the entries in this file is:
#major minor lastminor modules
#le -1 0 pfil
#qe -1 0 pfil
hme -1 0 pfil
#qfe -1 0 pfil
#eri -1 0 pfil
#ce -1 0 pfil
#bge -1 0 pfil
#be -1 0 pfil
#vge -1 0 pfil
#ge -1 0 pfil
#nf -1 0 pfil
#fa -1 0 pfil
#ci -1 0 pfil
#el -1 0 pfil
#ipdptp -1 0 pfil
#lane -1 0 pfil
#dmfe -1 0 pfil
Which UNIX command must be executed to enable Solaris IP Filter firewall for the hme0 interface without rebooting the system?
ifconfig hme0 down; ifconfig hme0 unplumb; ifconfig hme0 plumb; autopush -f
autopush -f /etc/ipf/pfil.ap; ifconfig hme0 modlist
ifconfig hme0 pfil; ifconfig hme0 modlist
ifconfig hme0 modlist; autopush -f /etc/ipf/pfil.ap
autopush -f /etc/ipf/pfil.ap; ifconfig hme0 down unplumb; ifconfig hme0 plumb
Question No: 90 – (Topic 1)
You have a Solaris system with address 192.168.1.55 running Solaris IP Filter that is configured to block all outbound packets. Which additional rule allows the system to initiate ping requests to other systems on a Class B network?
block out quick proto icmp from 172.16.0.0/32 icmp-type 9
pass out quick proto tcp/udp from 192.168.1.55/32 to any
pass out proto ping from 192.168.1.55/32 to 192.168.1.55/24 keep state
pass out quick proto icmp from 192.168.1.55/32 to 172.16.0.0/16
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|