[Free] 2018(July) Ensurepass Cisco 300-135 Dumps with VCE and PDF 11-20

Ensurepass.com : Ensure you pass the IT Exams
2018 July Cisco Official New Released 300-135
100% Free Download! 100% Pass Guaranteed!

Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

Question No: 11 – (Topic 1)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

Which two statements are correct? (Choose Two)

  1. The source device has name resolution configured.

  2. The source device is using two routes for the destination, learned from different protocols.

  3. A device on the path is introducing considerable delay.

  4. The source device is loading balancing traffic.

Answer: A,D Explanation:

Router traces domain name (cisco.com) and it gets ICMP answers, so name resolution has

happened.

Per hop output shows 2 lines, hence 2 active paths exist.

Question No: 12 – (Topic 1)

Exhibit:

Ensurepass 2018 PDF and VCE

A network administrator is troubleshooting an EIGRP connection between RouterA, IP address 10.1.2.1, and RouterB, IP address 10.1.2.2. Given the debug output on RouterA, which two statements are true? (Choose two.)

  1. RouterA received a hello packet with mismatched autonomous system numbers.

  2. RouterA received a hello packet with mismatched hello timers.

  3. RouterA received a hello packet with mismatched authentication parameters.

  4. RouterA received a hello packet with mismatched metric-calculation mechanisms.

  5. RouterA will form an adjacency with RouterB.

  6. RouterA will not form an adjacency with RouterB.

Answer: D,F

Question No: 13 – (Topic 1)

Refer to exhibit:

Ensurepass 2018 PDF and VCE

After a junior technician configures a new branch office GRE tunnel, which step is missing from the configuration to pass traffic through tunnel on Router 1?

A. static route to 10.0.3.0/24 via 10.0.1.1 B. static route to 10.0.3.0/24 via 10.0.2.1 C. static route to 10.0.3.0/24 via 190.0.4.1 D. static route to 10.0.3.0/24 via 190.0.4.2

Answer: D

Topic 2, Troubleshooting VTP

Question No: 14 – (Topic 2)

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Which of statement is true regarding STP issue identified with switches in the given topology?

  1. Loopguard configured on the New_Switch places the ports in loop inconsistent state

  2. Rootguard configured on SW1 places the ports in root inconsistent state

  3. Bpduguard configured on the New_Switch places the access ports in error-disable

  4. Rootguard configured on SW2 places the ports in root inconsistent state

Answer: A Explanation:

On the new switch, we see that loopguard has been configured with the 鈥渟panning-tree guard loop鈥?command.

Ensurepass 2018 PDF and VCE

The loop guard feature makes additional checks. If BPDUs are not received on a non-

designated port, and loop guard is enabled, that port is moved into the STP loop- inconsistent blocking state, instead of the listening / learning / forwarding state. Without the loop guard feature, the port assumes the designated port role. The port moves to the STP forwarding state and creates a loop.

Question No: 15 – (Topic 2)

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

PC2 in VLAN 200 is unable to ping the gateway address 172.16.200.1; identify the issue.

  1. VTP domain name mismatch on SW4

  2. VLAN 200 not configured on SW1

  3. VLAN 200 not configured on SW2

  4. VLAN 200 not configured on SW4

Answer: D Explanation:

By looking at the configuration for SW2, we see that it is missing VLAN 200, and the 鈥渟witchport access vlan 200鈥?command is missing under interface eth 0/0:

Ensurepass 2018 PDF and VCE

Question No: 16 – (Topic 2)

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

You have configured PVST load balancing between SW1 and the New_Switch in such a way that both the links E2/2 and E2/3 are utilized for traffic flow, which component of the configuration is preventing PVST load balancing between SW1 and SW2 links

  1. Port priority configuration on SW1

  2. Port priority configuration on the New_Switch

  3. Path cost configuration on SW1

  4. Path cost configuration on the New_Switch

Answer: D Explanation:

Here is the configuration found on the New_Switch:

Ensurepass 2018 PDF and VCE

This causes the port cost for link eth 1/3 to increase the path cost to 250 for all VLANs, making that link less preferred so that only eth 1/2 will be used.

Question No: 17 – (Topic 2)

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Refer to the topology.

SW1 Switch Management IP address is not pingable from SW4. What could be the issue?

  1. Management VLAN not allowed in the trunk links between SW1 and SW4

  2. Management VLAN not allowed in the trunk links between SW1 and SW2

  3. Management VLAN not allowed in the trunk link between SW2 and SW4

  4. Management VLAN ip address on SW4 is configured in wrong subnet

  5. Management VLAN interface is shutdown on SW4

Answer: D Explanation:

In the network, VLAN 300 is called the Management VLAN. Based on the configurations shown below, SW1 has VLAN 300 configured with the IP address of 192.168.10.1/24, while on SW4 VLAN 300 has an IP address of 192.168.100.4/24, which is not in the same subnet.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Topic 3, Troubleshooting EIGRP

Question No: 18 – (Topic 3)

Scenario:

You have been brought in to troubleshoot an EIGRP network. You have resolved the initial issue between routers R2 and R4, but another issue remains. You are to locate the problem and suggest solution to resolve the issue.

The customer has disabled access to the show running-config command.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

The network segment between R2 and R4 has become disconnected from the remainder of the network. How should this issue be resolved?

  1. Change the autonomous system number in the remainder of the network to be consistent with R2 and R4.

  2. Move the 192.168.24.0 network to the EIGRP 1 routing process in R2 and R4.

  3. Enable the R2 and R4 router interfaces connected to the 192.168.24.0 network.

  4. Remove the distribute-list command from the EIGRP 200 routing process in R2.

  5. Remove the distribute-list command from the EIGRP 100 routing process in R2.

Answer: B Explanation:

When issuing the 鈥渟how ip eigrp neighbor鈥?command (which is about the only command that it lets you do in this question) you will see that all other routers are configured for EIGRP AS 1. However, the 192.16824.0 network between R2 and R4 is incorrectly configured for EIGRP AS 100:

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Question No: 19 – (Topic 3)

You have been brought in to troubleshoot an EIGRP network. A network engineer has made configuration changes to the network rendering some locations unreachable. You are to locate the problem and suggest solution to resolve the issue.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

R5 has become partially isolated from the remainder of the network. R5 can reach devices on directly connected networks but nothing else. What is causing the problem?

  1. An outbound distribute list in R3

  2. Inbound distribute lists in R5

  3. An outbound distribute list in R6

  4. Incorrect EIGRP routing process ID in R5

Answer: B Explanation:

Here we see that distribute list 3 has been applied to EIGRP on router R%, but access-list 3 contains only deny statements so this will effectively block all routing advertisements from its two EIGRP neighbors, thus isolating R5 from the rest of the EIGRP network:

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Topic 4, Troubleshooting HSRP

Question No: 20 – (Topic 4)

Scenario:

You have been asked by your customer to help resolve issues in their routed network. Their network engineer has deployed HSRP. On closer inspection HSRP doesn#39;t appear to be operating properly and it appears there are other network problems as well. You are to provide solutions to all the network problems.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Examine the configuration on R5. Router R5 do not see any route entries learned from R4; what could be the issue?

  1. HSRP issue between R5 and R4

  2. There is an OSPF issue between R5and R4

  3. There is a DHCP issue between R5 and R4

  4. The distribute-list configured on R5 is blocking route entries

  5. The ACL configured on R5 is blocking traffic for the subnets advertised from R4.

Answer: B Explanation:

If we issue the 鈥渟how ip route鈥?and 鈥渟how ip ospf neighbor鈥?commands on R5, we see that there are no learned OSPF routes and he has no OSPF neighbors.

Ensurepass 2018 PDF and VCE

100% Ensurepass Free Download!
Download Free Demo:300-135 Demo PDF
100% Ensurepass Free Guaranteed!
300-135 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.