[Free] 2018(June) Dumps4cert Microsoft 70-680 Dumps with VCE and PDF Download 181-190

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Microsoft Official New Released 70-680
100% Free Download! 100% Pass Guaranteed!

TS: Windows 7, Configuring

Question No: 181 – (Topic 2)

You have a computer that runs Windows 7.

You need to identify which unsigned drivers have been installed. Which command should you run?

  1. Cipher.exe /s

  2. Driverquery.exe /si

  3. Msinfo32.exe /q

  4. Pnputil.exe -i

Answer: B Explanation:

Driverquery: Displays a list of all installed device drivers and their properties. /si: Displays digital signature information for both signed and unsigned device drivers.

Question No: 182 – (Topic 2)

You have a computer that runs Windows 7. You attempt to add files to

%programfiles%\app1 and receive a prompt to elevate your privileges. You need to ensure that you can add files to %programfiles%\app1 without receiving a prompt for elevated privileges. The solution must prevent harmful applications from making unwanted changed to the system. What should you do?

  1. Enable the built-in administrator account.

  2. Modify the User Account Control (UAC) settings.

  3. Add your user account to the local Power Users group.

  4. Modify the permissions of the %programfiles%\app1 folder.

Answer: D

Explanation: In order to secure a computer and its resources, you must consider the rights that users will have. You can secure a computer or multiple computers by granting users or groups specific user rights. You can help secure an object, such as a file or folder, by assigning permissions to allow users or groups to perform specific actions on that object.

Question No: 183 – (Topic 2)

Your company#39;s chief accountant consults you with a question about a financial spreadsheet. She needs to recover the version of this particular spreadsheet that existed six months ago because it is needed for a financial audit. Using Restore Previous Versions, you find that the oldest version stored is dated three months ago. How can you recover the

required file?

  1. Edit the System Protection properties for the volume that hosts the file. Use the Max Usage slider to increase the maximum proportion of the hard disk capacity used for system protection to 70 percent.

  2. Perform a system restore. Select a system restore point that was created six months ago.

  3. Edit the System Protection properties for the volume that hosts the file. Select the Only Restore Previous Versions Of Files setting.

  4. Use the Backup And Restore console to recover the file from a backup set generated six months ago.

Answer: D

Question No: 184 – (Topic 2)

You are investigating instability and boot problems on a computer running Windows 7 Enterprise. You boot using the Last Known Good Configuration (Advanced) option and perform a system restore. This does not solve your problems, and you want to undo the system restore. Can you do this, and what is the reason for your answer?

  1. No. You can undo a system restore only if you initiate it from the System Recovery tools.

  2. No. You can undo a system restore only if you carry it out after booting normally.

  3. Yes. You can always undo a system restore, no matter how you booted the computer or how you initiated the restore.

  4. Yes. You can undo a system restore that you perform after either booting normally or booting using Last Known Good Configuration (Advanced).

Answer: D

Question No: 185 – (Topic 2)

You have a computer that runs Windows 7. The computer is in a workgroup.

You need to ensure that you can decrypt Encrypting File System (EFS) files on the computer if you forget your password.

What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

  1. From Credential Manager, select Back up vault.

  2. From User Accounts, select Create a password reset disk.

  3. From User Accounts, select Manage your file encryption certificates.

  4. From Authorization Manager, modify the Authorization Manager options.

    Answer: B,C Explanation: Password reset disks

    It is not unusual for users to forget their passwords to local user accounts from time to time, especially when they use strong passwords. Before the advent of password reset disks, the only way for administrators to restore a forgotten local user account password was to manually reset the user#39;s password. In the process, the following information was lost: E- mail that was encrypted with the user#39;s public key Internet passwords that were saved on the computer Files that the user had encrypted Password reset disks offer another solution to the problem of a forgotten password for a local user account. If users create password reset disks for their local accounts before they forget their passwords, they can reset the passwords without losing valuable data that was lost previously with administrative password resets. When you create a password reset disk, a public key and private key pair are created. The private key is stored on a disk: the password reset disk. The public key encrypts the local user account password. If users forget their passwords, they can insert the password reset disk, which contains the private key, and decrypt the current password. The Forgotten Password Wizard prompts the user for a new password, which is then encrypted with the public key. Data is not lost because, basically, the user is simply changing a password. It is essential that password reset disks be stored in secured locations.Back up your Encryption Certificate

    1. Open User Accounts by clicking the Start button, clicking Control Panel, clicking User Accounts and Family Safety (or clicking User Accounts, if you are connected to a network domain), and then clicking User Accounts.

    2. In the left pane, click Manage your file encryption certificates.

    3. In the Encrypting File System wizard, click Next.

    4. Click Use this certificate, and then click Next.

      If you need more details to identify the certificate that is listed, click View certificate. If you want to choose a different certificate, click Select certificate, and then click the certificate you want to back up.

    5. Click Back up the certificate and key now.

    6. Type or navigate to the location where you want to store the backup. We recommend that you store the backup on removable media such as a disc or USB flash drive.

    7. Type and then confirm a password for the backup file, and then click Next. We recommend that you protect the backup file with a strong password.

    8. Select the I#39;ll update my encrypted files later check box, and then click Next.

      Question No: 186 – (Topic 2)

      You have a computer that runs Windows Vista (x86).

      You need to perform a clean installation of Windows 7 (64-bit). What should you do?

      1. From the Windows 7 installation media, run Rollback.exe.

      2. From the Windows 7 installation media, run Migsetup.exe.

      3. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Upgrade option.

      4. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Custom (advanced) option.

Answer: D Explanation:

When you are performing a clean installation, you should select Custom (Advanced). Almost all installations ofm Windows 7 that you will perform will be of the Custom (Advanced) type rather than upgrades. You can initiate upgrade installations only from within Windows Vista or Windows 7.NOT Rollback, Migsetup, or Upgrade:Specified clean installation not migration, update or rollback.

Question No: 187 – (Topic 2)

You have a computer that runs windows 7.

The windows experience index displays the subscores in the following.

Component Subscore Processor 6.9

Memory (RAM) 5.3

Graphics 3.2

Gaming graphics 4.1 Primary hard disk 4.5

You need to increase the Windows Experience Index base score. What should you do?

  1. Add more RAM.

  2. Add a second hard disk.

  3. Upgrade the video adapter.

  4. Upgrade to a faster processor.

Answer: C

Question No: 188 – (Topic 2)

You have a computer that runs WindowsXP. The computer has one partition. You install Windows 7 on the computer.

You need to migrate a user profile from the Windows XP installation to Windows 7 installation.

What should you do first?

  1. From Windows 7, run Scanstate.exe /offlineWinOld:c:\windows.

  2. From Windows 7, run Scanstate.exe /offlineWinOld:c:\windows.old.

  3. At the command prompt, run Xcopy /s /e c:\windows\users\*.* c:\users\.

  4. At the command prompt, run Xcopy /s /e c:\windows.old\documents and settings\*.* c:\users\.

Answer: B Explanation:

/offlinewinold: “Windows.old diredctory”

This command-line option enables the offline migration mode and starts the migration from the location specified. It is only intended to be used in Windows.old migration scenarios, where the migration is occurring from a Windows.old directory.

NOT Xcopy

Copies files and directories, including subdirectories.

/s Copies directories and subdirectories, unless they are empty. If you omit /s, xcopy works within a single directory.

Question No: 189 – (Topic 2)

You have a computer that runs Windows Vista. The hard disk is configured as shown in the exhibit. (Click the Exhibit button.)

You need to install Windows 7 in a dual-boot configuration. What should you do?

Dumps4Cert 2018 PDF and VCE

  1. From Windows Vista, extend Disk 0 Partition 1. Install Windows 7 in Disk 0 Partition 1.

  2. From Windows Vista, create a new partition. Install Windows 7 in Disk 0 Partition 1.

  3. Start the computer from the Windows 7 installation media. Install Windows 7 in Disk 0

    Partition 1.

  4. Start the computer from the Windows 7 installation media. Install Windows 7 in the unallocated space on Disk 0.

Answer: D Explanation:

The key to configuring dual-booting is ensuring that each operating system has its own partition or hard disk drive.

To dual-boot with Windows 7, you need to be able to create a new volume of at least 15 GB.

Even if you have more free space available on the volume you want to shrink, you may not be able to create a volume of the appropriate size because Windows Vista may not be able to move some special types of data to a different place on the hard disk drive.

When configuring a new computer to boot between multiple operating systems, it is also necessary to install operating systems in the order that they were released. For example, if you want to boot between Windows XP and Windows 7 on a new computer, you need to install Windows XP before you install Windows 7. If you install Windows XP after Windows 7, the Windows XP installation routine cannot recognize the Windows 7 operating system installation, and the computer only boots into Windows XP. It is possible to repair the computer from this point using Windows 7 startup repair so that it dual-boots, but the simplest course of action is just to install the operating systems in the order in which they were released by Microsoft.

Question No: 190 – (Topic 2)

You have two portable computers named Computer1 and Computer2 that run Windows 7. You configure Computer1 to connect to a wireless network named Network1.

You need to configure Computer2 to connect to Network1 by using the same settings as Computer1.

What should you do on Computer1?

  1. At the command prompt, run Wecutil.exe -es -gr.

  2. At the command prompt, run Winrs.exe -environment.

  3. From Windows Firewall with Advanced Security, export the policy.

  4. From the wireless network properties of Network1, copy the network profile to a USB flash drive.

    Answer: D Explanation:

    The Copy this network profile to a USB flash drive link launches the Copy Network Settings wizard, which writes the wireless network profile settings to a USB flash drive. You can then use this flash drive to automate the wireless network profile configuration of other computers. To save your wireless network settings to a USB flash drive, insert a USB flash drive into the computer, and then follow these steps:

    1. Click to open Network and Sharing Center.

    2. In the left pane, click Manage wireless networks.

    3. Right-click the network, click Properties, and then click Copy this network profile to a USB flash drive.

    4. Select the USB device, and then click Next.

    5. Follow the instructions in the wizard, and then click Close.

      Dumps4Cert 2018 PDF and VCE

      100% Dumps4cert Free Download!
      Download Free Demo:70-680 Demo PDF
      100% Dumps4cert Pass Guaranteed!
      70-680 Dumps

      Dumps4cert ExamCollection Testking
      Lowest Price Guarantee Yes No No
      Up-to-Dated Yes No No
      Real Questions Yes No No
      Explanation Yes No No
      PDF VCE Yes No No
      Free VCE Simulator Yes No No
      Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.